Prevost Lubricator
$48.77 – $108.48
- Description
- Additional information
Description
Prevost Lubricator
- Prevost Filtration oil-mist lubricators inject a dose of lubricant into the filtered air
Fine adjustment using dial
Rigorous adjustment by needle screw
Possibility to fill the oil tank while under pressure
Rigorous adjustment by needle screw
Possibility to fill the oil tank while under pressure
The Advantages of Prevost Filtration Lubrication
Reduce friction between moving parts
Prevent seizing
Protect against corrosion
Adsorbs and evacuates heat
- Increase the efficiency and service life of pneumatic tools To maximize eff effectiveness, the air hose between the lubricator and pneumatic tool should not exceed 10 meters.
Max. working pressure : 145 psi
Temperature : +40°F to +120°F
| Module | T1 | L1 | L2 | L3 | L4 | L5 | B1 | B2 | B3 | B4 | B5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ATU L200 | 1/8″ FNPT | 163 mm | 85 mm | 56.5 mm | 26.5 mm | 35 mm | 40 mm | 42 mm | 22.5 mm | 55.5 mm | SQ36 |
| ATU L201 | 1/4″ FNPT | 163 mm | 85 mm | 56.5 mm | 26.5 mm | 35 mm | 40 mm | 42 mm | 22.5 mm | 55.5 mm | SQ36 |
| ATU L202 | 3/8″ FNPT | 221 mm | 114.5 mm | 70.5 mm | 25 mm | 50 mm | 62 mm | 62 mm | 33 mm | 77.5 mm | SQ56 |
| ATU L203 | 1/2″ FNPT | 221 mm | 114.5 mm | 70.5 mm | 25 mm | 50 mm | 62 mm | 62 mm | 33 mm | 77.5 mm | SQ56 |
Additional information
| Flow rate (cfm at 100 psi) | 20, 34, 85, 140 |
|---|---|
| FNTP Thread (in) | 1/2 in FNPT, 1/4 in FNPT, 1/8 in FNPT, 3/8 in FNPT |
